Easy Peasy Earrings
If you are a beginner and you have never made any jewelry before, then here are a couple of earring ideas that could not be easier.
Using any beads you would like to use, you can make beautiful sets of earrings and no-one will know how easy there were to make.
So check out the two easy peasy earring ideas below, using the same technique.
If you are a beginner and you have never made any jewelry before, then here are a couple of earring ideas that could not be easier.
Using any beads you would like to use, you can make beautiful sets of earrings and no-one will know how easy there were to make.
So check out the two easy peasy earring ideas below, using the same technique.
Zebra Wow Earrings
Tools
Snipper tool
Round nose pliers

Materials
Two silver plated wire earrings.
Two 2" silver plated head pins.
Two 3/4" glass disc beads.
Two silver plated wire earrings.
Two 2" silver plated head pins.
Two 3/4" glass disc beads.

Step 1
Place one 3/4" glass disc bead onto a 2" head pin.
Place one 3/4" glass disc bead onto a 2" head pin.

Step 2
Using the snipper tool cut the 2" head pin to about 3/8 of an inch.
Using the snipper tool cut the 2" head pin to about 3/8 of an inch.

Step 3
Using the round nose pliers make a loop - DO NOT CLOSE THE LOOP.
Using the round nose pliers make a loop - DO NOT CLOSE THE LOOP.

Step 4
Place a wire earring onto the open loop. Close the loop using the round nose pliers.
Place a wire earring onto the open loop. Close the loop using the round nose pliers.

Step 5
Repeat Steps 1-4 for the second earring. Once complete you will have yourself a great pair of 'Zebra Wow Earrings'.
Repeat Steps 1-4 for the second earring. Once complete you will have yourself a great pair of 'Zebra Wow Earrings'.
Mother of Pearl Trio Earrings
Tools
Snipper tool
Round nose pliers

Materials
Two silver plated wire earrings.
Two 2" silver plated head pins.
6 Mother of pearl disc beads.
Two silver plated wire earrings.
Two 2" silver plated head pins.
6 Mother of pearl disc beads.

Step 1
Place three mother of pearl disc beads onto a 2" head pin.
Place three mother of pearl disc beads onto a 2" head pin.

Step 2
Using a snipper tool cut the 2" head pin to about 3/8 of an inch.
Using a snipper tool cut the 2" head pin to about 3/8 of an inch.

Step 3
Using the round nose pliers make a loop - DO NOT CLOSE THE LOOP.
Using the round nose pliers make a loop - DO NOT CLOSE THE LOOP.

Step 4
Place a wire earring onto the open loop.
Place a wire earring onto the open loop.

Step 5
Close the loop using the round nose pliers.
Close the loop using the round nose pliers.

Step 6
Repeat Steps 1-5 for the second earring. Once complete you will have a pair gorgeous 'Mother of Pearl Trio Earrings'.
Repeat Steps 1-5 for the second earring. Once complete you will have a pair gorgeous 'Mother of Pearl Trio Earrings'.