Round nose pliers
Flat nose pliers
Needle nose pliers
2 Silver plated wire earrings
2 Silver plated hoop pendant/earring attachments - 1" diameter
2 Semi-precious stones
2 Silver plated 2" head pins
2 Silver plated 6mm split rings
Put one semi-precious stone onto a 2" head pin.
Take the wire snippers and cut the 2" head pin to about 3/8".
Use the round nose pliers and make a loop. Do not close the loop, keep the edge of the loop slightly open.
Hook the opened loop into the inner opening of the hoop. Then close the loop with the round nose pliers.
Using the flat nose pliers and needle nose pliers open a split ring. The best way to open a split ring is to twist open, never pull it apart.
Hook the split ring into the outer opening of the hoop.
Before closing the split ring add the wire earring. Then close the split ring using the flat nose and needle nose pliers.
Repeat steps 1 through 7 for the second earring. Once complete you will have yourself a great pair of "Hoopla Earrings".