Make them with crystal stones for a little extra sparkle, or some semi-precious stones. Why not use your birth stone and wear them for all occasions! Whatever beads, stones or crystals you desire to use, you will have yourself a unique pair of earrings!
Round Nose Pliers
Flat Nose Pliers
Needle Nose Pliers
Two silver plated earring wires.
Two silver plated chandelier earring/pendant attachments.
Twelve 1" silver plated head pins.
Two 6mm silver plated split rings.
Twenty-four semi-precious stone chip beads.
Place three semi-precious stone chip beads onto a 1" head pin.
Using a snipper tool cut the 1" head pin to 3/8 of an inch
Using the round nose pliers make a loop - DO NOT CLOSE THE LOOP.
Repeat steps 1-3 until you have six head pins, two with three semi-precious stones, two with two semi-precious stones and two with one semi-precious stone.
Take a chandelier earring/pendant attachment and on the inside hole opening, place one of the three stone head pins.
Using the round nose pliers close the loop.
On the outside chandelier holes add a three stone head pin to the center hole. On either side of the three stone head pin add a two stone head pin. Finally on either side of the two stone head pin add the one stone head pin. Close each of the loops as you go with the round nose pliers.
Using the flat nose and needle nose pliers open a 6mm split ring.
Place the chandeliers top hole onto the open split ring.
Place a wire earring also onto the open split ring.
Using the flat nose and needle nose pliers close the split ring.
Repeat steps 1-12 for the second earring. Once complete you will have yourself an amazing show stopping pair of 'Chic Chandelier Earrings'.